Cheap Onkyo M-282 2-Channel Power Amplifier

5/20/12 Posted by Sale

Onkyo M-282 2-Channel Power Amplifier for Sale - Review & Buy at Cheap Price


List Price : $349.00


Price : Too low to display




Onkyo M-282 2-Channel Power Amplifier Feature | Sale - Review & Buy at Cheap Price

  • 100 Watts per Channel Minimum into 8 Ohms, 2 Channels Driven, FTC
  • Auto power on/off
  • High current, low impedance drive
  • Preamp-level input-output loop
  • 12volt trigger and input level adjustment
Brand:
List Price:
$349.00
Our Price:
Too low to display
Total Price:
Too low to display
Usually ships in 24 hours
Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.) If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver. You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source. The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz. Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal. What's in the Box - Power amplifier, an AC power cord, and a user's manual.

Onkyo M-282 2-Channel Power Amplifier Overview | Sale - Review & Buy at Cheap Price

Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.) If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver. You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source. The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz. Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal. What's in the Box - Power amplifier, an AC power cord, and a user's manual. Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)

If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver.

You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source.

The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz.

Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal.

What's in the Box
Power amplifier, an AC power cord, and a user's manual.

Onkyo M-282 2-Channel Power Amplifier Specifications | Sale - Review & Buy at Cheap Price

Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)

If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver.

You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source.

The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz.

Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal.

What's in the Box
Power amplifier, an AC power cord, and a user's manual.

Onkyo M-282 2-Channel Power Amplifier

Onkyo M-282 2-Channel Power Amplifier Features

  • 100 Watts per Channel Minimum into 8 Ohms, 2 Channels Driven, FTC
  • Auto power on/off
  • High current, low impedance drive
  • Preamp-level input-output loop
  • 12volt trigger and input level adjustment
Our Price : $349.00 Onkyo M-282 2-Channel Power Amplifier Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.) If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver. You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source. The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz. Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal. What's in the Box - Power amplifier, an AC power cord, and a user's manual.

Reviews More...

Available at Amazon Check Price Now!


*** Product Information and Prices Stored: May 20, 2012 19:10:11

Visit : for Sale . . nikon news and rumors jensen vm9424 manual cpu processor reviews

Labels: ,

Hot Deals Polk Audio CS10 Center Channel Speaker (Single, Black)

5/17/12 Posted by Sale

Polk Audio CS10 Center Channel Speaker (Single, Black) for Sale - Review & Buy at Cheap Price


List Price : $199.95


Price : $118.68




Polk Audio CS10 Center Channel Speaker (Single, Black) Feature | Sale - Review & Buy at Cheap Price

  • Center channel speaker in black; recommended amplification of 20-125 watts/channel
  • Angled top allows you to invert the speaker and place it below your TV
  • Equipped with two 5.25-inch diameter bi-laminate organic fiber cone woofers; 1-inch silk/polymer composite Dynamic Balance dome tweeter
  • Magnetically shielded for safe placement near other entertainment equipment
  • Measures 6-1/2 by 20 x 9-3/4 inches (HxWxD)
Brand:
List Price:
$199.95
Our Price:
$118.68
Total Price:
$118.68
Usually ships in 24 hours
The CS10 center, like its larger brother the CS20 sounds just as good but is a little smaller. It still has an angled top allowing you to invert the speaker and place it below your TV- directing sound towards the listening area. CS10 works great with the TSi100, TSi200 and others. Speaking of the cabinet (no, not the Presidential Cabinet), it's extensively braced from MDF with ¾-Inch thick baffles. Cheaper speakers will use other material such as particle board which is flimsy, robbing you of good sound. With pewter accents, a piano black top plate and removable black grille, TSi speakers look awesome and take up less than one square foot. All models are available in a choice of black or cherry wood grain, so don't be ashamed to show off your stereo equipment.

Polk Audio CS10 Center Channel Speaker (Single, Black) Overview | Sale - Review & Buy at Cheap Price

The CS10 center, like its larger brother the CS20 sounds just as good but is a little smaller. It still has an angled top allowing you to invert the speaker and place it below your TV- directing sound towards the listening area. CS10 works great with the TSi100, TSi200 and others. Speaking of the cabinet (no, not the Presidential Cabinet), it's extensively braced from MDF with ¾-Inch thick baffles. Cheaper speakers will use other material such as particle board which is flimsy, robbing you of good sound. With pewter accents, a piano black top plate and removable black grille, TSi speakers look awesome and take up less than one square foot. All models are available in a choice of black or cherry wood grain, so don't be ashamed to show off your stereo equipment.

Unlike the electronics, your speakers won't go out of date, so bring out the most in your entertainment experience with Polk TSi Series. A great match to the TSi Series, the Polk Audio CS10 center channel speaker--the most important speaker in surround sound--is smaller than its sibling CS20, but still sounds just as good. And it has an angled top allowing you to invert the speaker and place it below your TV--directing sound towards the listening area. The TSi Series and the CS10 were designed to be highly efficient, so they can be driven easily by unpretentious receivers, and they're voice-matched for lifelike surround sound environments. This speaker in black measures 6-1/2 by 20 x 9-3/4 inches (HxWxD).

Polk Audio CS10 in black
The Polk Audio CS10 center channel speaker in black (see larger image).

Key Features

Quality built cabinets.

The cabinet is extensively braced from MDF with 3/4-inch thick baffles. Cheaper speakers will use other material such as particle board which is flimsy, robbing you of good sound. With pewter accents, a piano black top accents and removable black grille, the CS10 looks awesome.

High efficiency design.

Compatible with practically all electronics, these are speakers that produce sound that's open, spacious and clear, even when driven by modestly-powered amplifiers and receivers. No matter if you just bought a new digital surround receiver, or are hooking up this CS10 or TSi Series speakers to vintage electronics, they will still sound great.

Narrow baffle geometry.

Bringing the best of both worlds- narrow baffle geometry is a design that creates a sleek looking speaker with slick sound. First the high quality cabinet is slender (less than one square foot) and tucks away easily in your room. The smaller-diameter speaker components are lighter in mass, translating to clearer sound.

Polk Audio CS10 Center Channel Speaker (Single, Black) Specifications | Sale - Review & Buy at Cheap Price

Unlike the electronics, your speakers won't go out of date, so bring out the most in your entertainment experience with Polk TSi Series. A great match to the TSi Series, the Polk Audio CS10 center channel speaker--the most important speaker in surround sound--is smaller than its sibling CS20, but still sounds just as good. And it has an angled top allowing you to invert the speaker and place it below your TV--directing sound towards the listening area. The TSi Series and the CS10 were designed to be highly efficient, so they can be driven easily by unpretentious receivers, and they're voice-matched for lifelike surround sound environments. This speaker in black measures 6-1/2 by 20 x 9-3/4 inches (HxWxD).

Polk Audio CS10 in black
The Polk Audio CS10 center channel speaker in black (see larger image).

Key Features

Quality built cabinets.

The cabinet is extensively braced from MDF with 3/4-inch thick baffles. Cheaper speakers will use other material such as particle board which is flimsy, robbing you of good sound. With pewter accents, a piano black top accents and removable black grille, the CS10 looks awesome.

High efficiency design.

Compatible with practically all electronics, these are speakers that produce sound that's open, spacious and clear, even when driven by modestly-powered amplifiers and receivers. No matter if you just bought a new digital surround receiver, or are hooking up this CS10 or TSi Series speakers to vintage electronics, they will still sound great.

Narrow baffle geometry.

Bringing the best of both worlds- narrow baffle geometry is a design that creates a sleek looking speaker with slick sound. First the high quality cabinet is slender (less than one square foot) and tucks away easily in your room. The smaller-diameter speaker components are lighter in mass, translating to clearer sound.

Polk Audio CS10 Center Channel Speaker (Single, Black)

Polk Audio CS10 Center Channel Speaker (Single, Black) Specification

  • Center channel speaker in black; recommended amplification of 20-125 watts/channel
  • Angled top allows you to invert the speaker and place it below your TV
  • Equipped with two 5.25-inch diameter bi-laminate organic fiber cone woofers; 1-inch silk/polymer composite Dynamic Balance dome tweeter
  • Magnetically shielded for safe placement near other entertainment equipment
  • Measures 6-1/2 by 20 x 9-3/4 inches (HxWxD)
List Price : $199.95
Our Price : $118.68
You Save : 41% Polk Audio CS10 Center Channel Speaker (Single, Black) The CS10 center, like its larger brother the CS20 sounds just as good but is a little smaller. It still has an angled top allowing you to invert the speaker and place it below your TV- directing sound towards the listening area. CS10 works great with the TSi100, TSi200 and others. Speaking of the cabinet (no, not the Presidential Cabinet), it's extensively braced from MDF with ¾-Inch thick baffles. Cheaper speakers will use other material such as particle board which is flimsy, robbing you of good sound. With pewter accents, a piano black top plate and removable black grille, TSi speakers look awesome and take up less than one square foot. All models are available in a choice of black or cherry wood grain, so don't be ashamed to show off your stereo equipment.

Reviews More...

Available at Amazon Check Price Now!


*** Product Information and Prices Stored: May 17, 2012 16:25:11

Recommend : for Sale . . window air conditioner amps sony lcd monitor 1410 zune hd java

Labels: , , , ,
Subscribe to: Posts (Atom)